INSULITTE-UBS TILES
TRIED, TESTED, TRUSTED
|
|
|
|
|
Enercon , introduces Insulitte , India’s first coolest and green roofing tile , on which you can actually walk bare footed , in the noon during summer
Insulitte , a unique composition of naturally occurring puffed silicious material , white cement blended with fibrous polymer
It acts as an radient barrier, provide significant resistance to heat transfer and increases the building comforts. And helps Reducing in
Energy Costs. |
 |
100% environmentally , eco friendly tiles |
|
Durable ,low thermal conductivity |
|
Simple & easy application , just like mosaic tiles |
|
Reduces heat transmission through roof slab , and increases building comforts |
|
Aids in reducing air condition power consumption |
|
PERMANENT , AND LONG LASTING |
|
| Properties : |
| 19 mm |
 |
| Type |
White insulating fibrous green tiles |
| Appearance |
White |
| Materials used |
White cement , special insulating additives fibers filaments |
| Weight |
3.5 Kg/ft2 (37.66 Kg/m2) |
| Thickness |
Approx 19 mm |
| Size |
12” x 12” |
| Flexural stress |
( Upto ) 150.0 Kg/cm2 |
| Average Water Absorptionr |
7.30 (maximum |
| Water permeability |
impervious to water |
| Thermal conductivity |
0.14 w/mk |
|
|
| |
| 60 mm |
 |
| Type |
White insulating fibrous green tiles |
| Appearance |
White |
| Materials used |
cement , vermiculite, , agrowaste , flyash, pp fibers and others |
| Weight |
7.00 Kg/ft2 (75.32 Kg/m2) |
| Thickness |
Approx 60 mm |
| Size |
250 x 250 mm |
| Flexural stress |
( Upto ) 30 Kg/cm2 |
| Average Water Absorptionr |
7.30 (maximum |
| Thermal conductivity |
0.10 w/mk |
|
|
| |
|
|
|
Ready to use thermal insulating plaster , which also substitutes POP over sand cement plaster,applied over brick / rcc upon interiors walls. |
|
Features : |
| |
Low density , higher coverage |
| |
Gradual setting , with no shrinkage cracks |
| |
No water curing |
| |
Good bond , good strength |
| |
Easy workability |
| |
Type : gysum powder, 2-5% vermiculite & insulating additives |
| |
Packing : 25kg hdpe bags |
| |
Colour : off white |
| |
Bulk Density : 1350 kg/m3 |
| |
Thermal conductivity : 0.50 w/mk |
| |
Setting time : 12-15 min |
| |
Coverage : 55-60m2 / 12mm /1000kg |
|
Notice :
All statement , technical information and recommendations contained herein are based on reliable tests. However, the accuracy of completeness of these are not guaranteed. The users are advised to carry our the test and take trial to satisfy on the suitability of the product. |
|
